BARIX Instreamer Bedienungsanleitung PDF herunterladen (Seite 55)

User Manual “Instreamer“ - V4.03 - 24th October 2013

6.2 Serial Rescue

The “Serial Rescue” procedure loads the entire

firmware and resets the device to factory default

settings (current configuration is overwritten).

It is therefore helpful to note the current setting.

Printing out the “status” page is the quickest way as

the page contains all configuration parameters.

Open your web browser and type in the IP address

of the Barix device in the URL field and hit the

“Enter” key. Press the STATUS button.

To apply the Rescue using a serial cross cable and a

PC running Windows, Linux or a MAC follow the

steps in the “_readme1st.txt” carefully as there are a

number of different options available.

Allow approximately 2 minutes to complete the

“Serial Rescue” procedure. After a successful

rescue the device is ready for configuration

according to your needs

(see chapter 3 Device Configuration).

6.3 Web Update

To apply the “Web Update” procedure you will need

a standard web browser and the IP address of the

device (announced by the SonicIP feature).

Make sure that the “Web server port” is set to “80”

before starting the procedure.

The upload itself will take about 10 seconds.

STEP 1

Open your web browser

BARIX AG | 28. Jan. 2014 | Updating the device | 55 /63

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63

Keine Kommentare

BARIX Instreamer Bedienungsanleitung Seite 55