BARIX Instreamer Bedienungsanleitung PDF herunterladen (Seite 30)

User Manual “Instreamer“ - V4.03 - 24th October 2013

stereo inputs.

Encod./Quality 0 1 2 3 4 5 6 7

MPEG1 48kHz 88 96 104 120 144 160 176 192

MPEG2 16kHz 35 38 44 48 56 64 80 96

The above table shows only the average bit rates for

16 kHz and for 48 kHz. As the “stereo” adds about

20 to 30 percent when compared to “mono” other

sampling frequencies can be calculated using the

previous “mono” table.

Advanced Encoder Settings

The following settings are for advanced users only.

Microphone gain (Annuncicom series only)

Choose the desired gain (

"21"

"43.5"

dB) for the

microphone.

Default setting is

"21"

dB.

A/D amplifier gain

Choose the desired gain (“-3” up to “19.5” dB) for

the line input A/D amplifier.

Default setting is

"-3"

dB.

MP3 Bit Reservoir

The Bitreservoir is used to compensate the

differences between the predefined frame sizes. If

set to

"use"

, the encoder will use the bit reservoir.

Note: if you use RTP streaming, to avoid audio

artefacts due to lost packets, set Bit Reservoir

"keep empty" and use VBR.

Default setting is

"use"

30 /63 BARIX AG | 28. Jan. 2014 | Device Configuration

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 62 63

Keine Kommentare

BARIX Instreamer Bedienungsanleitung Seite 30