BARIX Instreamer Bedienungsanleitung PDF herunterladen (Seite 35)

User Manual “Instreamer“ - V4.03 - 24th October 2013

Buffer Underrun Mode (TCP)

The Buffer Underrun Mode (TCP) defines the action

if a TCP stream is slower than the real stream from

the encoder. In this case the output streaming buffer

underruns and cannot hold older data any more. The

device can then “disconnect” the TCP connection or

it can ”skip” the stream directly to the encoder

stream without disconnecting TCP.

Streaming Packet Strategy

The Streaming Strategy defines how a packet is

build and sent. On “lowest latency” the encoded

data will be sent directly after the encoding. On

“optimal package” the packet will be filled up before

sending.

UDP Tx Source Port

This setting is only used with a custom software

application. Enter the used source port number for a

UDP stream (between 0 and 65535). When set to 0

the source port is set to the same port as selected in

the destination port (in section Stream to). If

destination is set to “origin source” the UDP

Receiver Port is used.

SHOUTCAST/ICECAST SETTINGS

The following parameters are used for Shoutcast

and Icecast

Own Name

You can enter the name of the Barix Instreamer

here. This is returned by the DISCOVER command

(see technical documentation).

Default setting is

"Instreamer"

. Used also as

Shoutcast station name (icy-name).

BARIX AG | 28. Jan. 2014 | Device Configuration | 35 /63

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 62 63

Keine Kommentare

BARIX Instreamer Bedienungsanleitung Seite 35