BARIX Instreamer Bedienungsanleitung PDF herunterladen (Seite 25)

User Manual “Instreamer“ - V4.03 - 24th October 2013

issued an IP address then most probably it also has

supplied a valid Gateway address, “0.0.0.0” will then

work fine.

If you have set a Static IP address then you will need

to configure a valid Gateway address manually. Try

first the same Gateway IP address your PC is set to.

If it doesn’t work then ask your Network

Administrator for a correct Gateway IP address.

Primary/Alternative DNS

In these fields you can provide DNS IP addresses

which are used to resolve URLs, e.g. www.radio.com

DHCP Host Name

From version VB3.17 a DHCP host name can be

configured for the device. If this field is left blank

then the device creates a DHCP name using part of

the Ethernet MAC address e.g.“CO1ED04” where

ED04 are the 2 least significant bytes of the MAC.

Web server port

Defines the port where the webserver of the Barix

Exstreamer can be reached. If set to "0" the default

HTTP port (80) is used. Default:

"0"

Type of Service/DSCP

Type Of Service value used for RTP and UDP

streaming. DSCP (Differentiated Service Code Point)

supersedes the IP4 ToS value and uses the first 6

bits of the TOS field.

The following table illustrates the DSCP values:

BARIX AG | 28. Jan. 2014 | Device Configuration | 25 /63

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 62 63

Keine Kommentare

BARIX Instreamer Bedienungsanleitung Seite 25