BARIX Instreamer Bedienungsanleitung PDF herunterladen (Seite 29)

User Manual “Instreamer“ - V4.03 - 24th October 2013

Warning: For potentially “lossy” transmission types,

typically RTP, use VBR where ever possible.

Note: For devices (e.g. Instreamer 100) with an

IPAM type of “generic” only VBR is supported.

Default:

"VBR".

MPEG CBR bitrate

If MPEG CBR encoding is selected the audio

compression level (and consequently the audio

quality) is selected by the "bitrate" field. Select the

audio bit rate in kilobits per second.

Please note that depending on the sampling rate not

all bitrates are available.

Default:

"128kbps"

Encoding Quality

If MPEG VBR encoding is selected the audio

compression level (and consequently the audio

quality) is selected by this parameter. Choose

between "0 lowest" and "7 highest" in steps of 1.

The encoder quality table below shows the average

bit rate in kilobits per second for the quality settings

and sampling frequencies in kHz using mono input

with MS-Stereo encoding disabled.

Encod./Quality 0 1 2 3 4 5 6 7

MPEG1 48kHz 72 76 80 88 96 112 144 160

MPEG1 44.1kHz 65 68 73 80 90 105 125 140

MPEG1 32kHz 52 56 64 72 80 96 112 136

MPEG2 24kHz 38 44 48 52 60 80 96 112

MPEG2 22.05kHz 35 38 40 45 50 60 75 90

MPEG2 16kHz 28 30 34 40 44 48 56 64

The encoder quality table below shows the average

bit rate in kbit/s (kilobits per second) for the quality

settings and sampling frequencies in kHz using

BARIX AG | 28. Jan. 2014 | Device Configuration | 29 /63

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 62 63

Keine Kommentare

BARIX Instreamer Bedienungsanleitung Seite 29