BARIX Instreamer Bedienungsanleitung PDF herunterladen (Seite 20)

User Manual “Instreamer“ - V4.03 - 24th October 2013

Input Source

Choose the desired Audio input source. Line mono

and MIC inputs are mono, the other settings are

stereo.

Default setting is

"Line stereo"

Audio Format

Select encoding (data) format and sampling

frequency. The formats are: MPEG, PCM

(uncompressed digital audio), uLaw (G.711), aLaw

(G.711).

Default setting is "MPEG2 / 22.5 kHz".

Streaming Mode

"send always"

will stream always

"send on CTS"

will stream depending on the state of

the CTS input.

"send on Level"

will stream if the incoming audio

signal is above the configured trigger level. The

default level is -24dB.

For send on CTS or send on Level, streaming can

also be controlled via the SEND and STOP buttons

on the HOME page.

Default setting is

"send on CTS"

STREAMING DESTINATION - Conn. type

Choose the type of connection.

Note: only selected types are listed. Please see

advanced settings for a complete list of options.

•

"not used"

for an unused destination

•

"RTP"

for Real Time Protocol. Use an IP

address 0.0.0.0 to send to the network

broadcast address.

•

"BRTP"

for the Barix extended RTP

protocol. The IP address is ignored. An

external device contacts this Instreamer on

the given port and statelessly registers to

receive the RTP stream. Up to 32 external

20 /63 BARIX AG | 28. Jan. 2014 | Device Configuration

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 62 63

Kommentare zu diesen Handbüchern

Keine Kommentare

BARIX Instreamer Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern