BARIX Streaming Client Bedienungsanleitung PDF herunterladen (Seite 8)

2 Device Status and Control

To view the current status and control it using the Web interface you will need:

• the IP address announced over the audio outputs (see the Quick Install Guide)

• a standard web browser

Open your web browser and type in the IP address of the Barix device in the URL ﬁeld and hit the

“Enter” key.

• Example: “192.168.0.12”

You will see the following window content:

The top frame shows the logos “INSTREAMER” and “BARIX”. A click on either logo will bring you

to the Barix homepage.

Help information will show up in the right, grey frame of the browser window.

The left white frame shows current status information and permits the control of the streaming

status, the simulation of the CTS input signal and the control of the RTS output. For details see the

section below.

2.1 Status and Control

Refresh

The status frame page is refreshed every couple of seconds. To refresh it on demand click the

reload button left of the word “Status”.

Status

Shows the current status "INACTIVE" or "SENDING".

Input peak value

The numbers [in dB full-scale] show the peak values of the encoder input (Line or Microphone)

for the left and right channel separately.

Maximum value is 0 dB.

8 Device Status and Control

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 34 35

Keine Kommentare

BARIX Streaming Client Bedienungsanleitung Seite 8