BARIX Instreamer Bedienungsanleitung PDF herunterladen (Seite 21)

Barix Instreamer User Manual Version 01.03

Page 19

11 FAQ and Troubleshooting

Q: I don’t see any status lights on at all.

A: Make sure the power cable is correctly plugged into the

unit and make sure the power supply is plugged into the

wall.

Q: Red status light is flashing red.

A: Make sure the network cable is plugged into the unit.

The status light on the jack indicates if you are connected

to the network or not. You can also ping the device to see

if it’s on your network.

Q: How do I ping the Barix Instreamer to see if it’s on my

network?

A: You can ping any device on your network by opening a

DOS command box.

Type ping and the IP address of the unit to see if you can

get a response.

Example: ping 192.168.2.10

The proper response would be to see the message “reply

from 192.168.2.10”.

If you see the message “request timed out”, it means that

the Barix Instreamer is not on your network or that you

have entered the wrong numbers for the IP address.

Q: When I type in the IP address into the browser I get a

“This Page Cannot Be Displayed” Message

A: This means that you cannot connect to the Barix

Instreamer. There could be a couple of different reasons.

Make sure you are typing in the IP address correctly.

Check the cables to make sure the Barix Instreamer is

properly connected to the network.

Q: Will the Barix Instreamer work on my operating

system?

A: The Barix Instreamer works on virtually any operating

system, to control the Barix Instreamer a standard web

browser is all you need.

12 Technical specifications

Audio Format:

MP3 from 8 up to 192 kBit VBR (Variable Bit Rate)

Stereo/Mono

Audio Interfaces:

Stereo Line In (RCA 2Vpp max, level)

Headphone Out (3.5 mm Jack, 4.2Vpp max)

S/PDIF In (optical and RCA coaxial)

volume, bass and treble adjustable by browser

Network Interface:

RJ45 10/100 Mbit Ethernet (Auto), TCP/IP,

UDP, ICMP, DHCP, AutoIP, SonicIP

®, IPzator™,

Integrated web server for control and configuration

Control Interfaces:

DSub 9pin male, 9600 Baud 8, N, 1

Miscellaneous:

Two LED (red and green) status indicators

Reset/Factory default button

Power requirements:

12 VDC 0.5 A, 230 VAC (EC) or

110 VAC (US) power supply included

Case:

Aluminum, 390 grams

6.5" x 1.5" x 5"

165 mm x 38 mm x 127 mm

Environmental conditions:

Temperature: 32 ~ 104° F / 0 ~ 40° C

Humidity: 0 ~ 70% relative humidity non-condensing

Certifications:

FCC A, CE A

User Interface:

Browser based (integrated web server),

serial port or Ethernet control API for home

automation systems

1 2 ... 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare

BARIX Instreamer Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung BARIX Instreamer